Brookfield Engineering introduces new sliding friction jig

5/13/2013

Brookfield Engineering introduces new sliding friction jig

MIDDLEBORO -- Brookfield Engineering introduces the TA-SFJ Sliding Friction Jig, which measures the coefficient of friction (COF) between two materials by sliding them against each other. One material is affixed to the base plate of the test fixture, while the other material is wrapped around a weight which is then pulled across the first material at constant speed.

The test apparatus utilizes the Brookfield CT3 Tester to pull the weight in a horizontal direction so that the sliding friction between the two materials is measured accurately over a distance that is sufficient to verify steady state behavior.

The TA-SFJ Sliding Friction Jig is used to measure tactile qualities like smoothness, slipperiness or stickiness. It is ideal for a wide variety of applications including: lubricants and grease, personal care products, and many types of surfaces and coatings.

Related News ///

FROM THE ARCHIVE ///

Comments ///

comments powered by Disqus