Would you like to start a free subscription?
Remember me | Forgot password
For full content view: Log in Now!
JIP on underbalanced drilling in marine environments. Currently, underbalanced drilling (UBD) procedures have been used in about 100 marine locations by most major operators. Primary use has been where casing is set and cemented into or on top of a subnormal or pressure-depleted formation, which is then drilled under- or near-balanced to avoid lost circulation and reservoir damage. And new dual-gradient drilling techniques may be viewed as a subset of UBD."
In U.S. OCS waters, MMS has required wells to be drilled overbalanced. For it to allow UBD in wells under its jurisdiction, it must be shown that it can be conducted in a safe and efficient manner. To that end, Maurer Technology and Texas A&M are going to conduct a joint industry research project (JIP) to enable state and federal regulators, and the drilling industry to be proactive in defining situations where UBD can be successfully applied offshore. This project will also extend to other international marine areas and regulators.
This area of the site is restricted.
In order to gain access, please either Log
In, or subscribe to World Oil.
Two options are available to you for creating an account.
1. Get a Free Trial Subscription to World Oil Magazine and gain immediate access to select content on World Oil Online.
Start a Free Trial Subscription and gain immediate access to the complete current issue of World Oil Magazine. Plus, you’ll receive 3 upcoming issues of World Oil Magazine in print or digital format.* You also receive access to the Energy Events Calendar, Industry Statistics and WO Wire’s news and industry coverage.
2. Purchase a subscription to World Oil magazine and gain immediate
and complete access to World Oil Online. As a Total Access subscriber
you will have access to all areas of the site available to registered users and
free subscribers as well as having access to such premium content areas as:
Physical copies of this content may be available for purchase. Visit the Reprints & Back Issues section.
If you are already a paid subscriber and do not have access, please email CustomerService@worldoil.com.
World Oil's specialized upstream Engineering Data Tables featuring the Drill Bit Classifier, Tubing Tables and more. Get Total Access today.
Aberdeen - December 2-3
Calgary - December 8-8
Mangaf - December 8-10
All material subject to strictly enforced copyright laws.
© 2014 World Oil. © 2014 Gulf Publishing Company.