Press Esc to close

WorldOil

World Oil News Center



GE to provide close to $600 million in turbomachinery equipment for Yamal LNG project

HOUSTON -- GE has received a contract to provide key turbomachinery equipment for the Yamal liquefied natural gas (LNG) megaproject that is being developed on the Yamal Peninsula in Russia’s northern Siberia region. The LNG produced at the site will be used to help meet growing energy needs, primarily of Asia and Pacific Region countries.

The LNG megaproject is owned by JSC Yamal LNG, a joint venture (JV) between Russia’s largest independent gas producer OAO Novatek (80 percent) and France’s Total SA (20 percent). The project is being implemented in the Arctic zone of Russia, in the Yamal Peninsula, near Sabetta port. The JV is building a gas liquefaction facility that will have a production capacity of 16.5 million tons per year, based on the feedstock resources of the South Tambeyskoye gas condensate field. Proved and probable reserves of natural gas (PRMS) of the South Tambeyskoye field exceed 900 Bcm (32 Tcf).

Underscoring its leadership in the LNG sector, GE Oil & Gas is supplying Technip and JGC consortium, the LNG plant EPC contractor, with critical turbomachinery equipment for three production lines, each with the capacity to produce about 5.5 million tons of LNG a year. Each train will consist of two main refrigeration units that turn natural gas into a liquid form for transportation. Both refrigeration units will feature:

• An 86-megawatt (MW) Frame 7E gas turbine.
• Three main refrigerant centrifugal compressors (two mixed refrigerant and one propane).
• A 24-MW variable speed drive starter/helper.
• Waste heat recovery units (WHRUs).
• Associated auxiliary equipment.

In all, GE will supply six Frame 7E gas turbines, 18 centrifugal compressors, six variable speed drives and six WHRUs. The turbines will be manufactured at GE Power & Water’s plant in Greenville, S.C., and the compressors will be manufactured at GE Oil & Gas’ facility in Florence, Italy. Two complete turbo-compressor systems will also be tested at GE Oil & Gas’ facility in Massa, Italy. Meanwhile, GE Power Conversion facilities in France will supply the variable speed drives. In addition to equipment supplies, GE Oil & Gas will also provide installation supervision and support at the commissioning stage.

GE is expected to deliver its equipment to Russia in the second half of 2015. According to the project plans, the first natural gas liquefaction train is to reach its full capacity in 2017, followed by the second and third trains in 2018 and 2019, respectively.

10/02/2013

 

Bookmark and Share


WO DATA HUB

EngineeringTablesIcon-Large

Engineering Data Tables

World Oil's specialized upstream Engineering Data Tables featuring the Drill Bit Classifier, Tubing Tables and more. Get Total Access today.

WO SUPPLEMENTS

2013 Fracturing Technology

2013 Fracturing Technology

MEDIA CENTER

By Digital Publisher

Drill Bit Classifier World Oil published its renowned Drill Bit Classifier in September 2013. The Drill Bit Classifier is a comprehensive listing of major manufacturers' d...

ENERGY EVENTS

Upcoming Events